Size- Regular Series: 105mm by 32.5mm by 23.7mm 107g
Size - Leather Series: 106mm by 32.5mm by 24.8mm 118.5g
Integrated 2000mAh Battery
Wattage Output Range: 5-80W
Voltage Output Range: 0.5-4.0V
Resistance Range: 0.15-2.5ohm
Zinc-Alloy Chassis Construction
Intuitive Firing Button
Two Adjustment Buttons
>0.69 OLED Display Screen
LED Indicator Light
Sliding Airflow Control Switch
5mL Pod Capacity
Side Fill System - Silicone Stoppered
SMOK RPM 3 Coil Series
0.15ohm RPM 3 Meshed Coil
0.23ohm RPM 3 Meshed Coil
Press-Fit Coil Connection
Coil Locking System
Magnetic Pod Connection
8 Seconds Cut Off
Pod Detection
Low Voltage Protection
Short-Circuit Protection
Type-C Port - 1.5A Charging (Leather Series)
Type-C Port - 1.2A Charging (Regular Series)
Introducing the SMOK Nord 5: 2000mAh Pod System with 5ml Capacity
SMOK Nord 5 Pod System is a redesigned powerhouse with a built-in 2000mAh battery large OLED display and a B Type-C charging port. The Nord 5 unitized RPM 3 coils and can accommodate 5ml of e-liquid.
What's in the Box
1 x Nord 5 Device
1 x Nord 5 Pod
1 x 0.15ohm RPM 3 Meshed Coils
1 x 0.23ohm RPM 3 Meshed Coils
1 x Type-C B Cable
1 x User Manual
How to use the SMOK Nord 5 Kit:
1. Charge the Device: The Nord 5 vape has an 2000mAh battery. Find the included charging cable and connect it to the Type-C charging port on the device. Plug the other end into a power source.
2. To Turn Power On/ Off: Fast press power button 5 times in succession to power on or off, and the white LED light will flash 3 times.
3. Fill SMOK Nord 5 POD: Pull out the rubber plug covering the slot, add e-liquid through the opening, and then press the rubber plug back into place carefully and firmly.
4. Prime the Coil (First Use Only): If it's a new coil or the first time filling the pod, let it sit for 5-10 minutes. This allows the coil's cotton to saturate with e-liquid and prevents burning.
5. Change power setting: Press the power button three times in quick succession. The power setting will begin to blink.The power setting will begin to blink. Press or long press the button to increase the power, and when the power setting reaches 80W, it will loop back to 5W. Once the desired power setting is reached, leave the device idle for three seconds to save the setting.
6. Vaping: Press the The Nord 5 KIT power button to fire.
7. Replace Coil: Firstly, pull out the pod, and then pull out the Nord 5 coil and install a new one in the pod.
For More Information:
You can find the SMOK Nord 5 user manual in the package.