- Dimensions: 122.5 x 31.2 x 29.5mm
- Wattage Output: 5 - 80W
- Voltage Output: 0.8 - 4.0V
- Resistance Range: 0.15 - 2.0ohm
- Single 18650 Battery Sold Separately)
- 0.96 Inch TFT Color Screen
- Intuitive Firing Button
- Durable Zinc Alloy Construction
- Stepless Airflow Control
- 6.5ml Pod Capacity
- Sliding Top Filling
- SMOK RPM 3 Coil Series
- 0.15ohm RPM 3 Mesh Coil (40 - 80W)
- 0.23ohm RPM 3 Mesh Coil (20 - 45W)
- Press Fit Coil Installation
- Magnetic Pod Connection
- Type-C B Charging
- Short-Circuit Protection
- 8S Cut-Off Protection
- Low Voltage Protection
- Intelligent Pod Detection
SMOK RPM 5 Pro 80W Pod Mod Kit
SMOK introduces the RPM 5 Pro pod system that is designed to be more compact and easy to use. This Pod Kit features up to 80W output for satisfying DTL vaping. Constructed of durable Zinc Alloy the RPM 5 Pro features an ergonomically designed chassis with a 0.96-inch TFT color screen and a step-less airflow control system. Magnetically connected to the device the RPM 5 Pod adopts a sliding top filling design to hold up to 6.5ml of your favorite, utilizing the new RPM 3 Coils to deliver massive clouds of flavorful vapor. As with all SMOK Pro models, the RPM5 Pro does not have an internal battery and can accept one 18650 battery (sold separately).
What's in the Box
- 1 x RPM 5 Pro Device
- 1 x RPM 5 Pod
- 1 x 0.15ohm RPM 3 Coil
- 1 x 0.23ohm RPM 3 Coil
- 1 x B Cable
- 1 x User Manual
How to use the SMOK RPM 5 PRO KIT:
1. Charge the Device: Find the included charging cable and connect it to the Type-C charging port on the device. Plug the other end into a power source.
2. To Turn Power On/ Off: Fast press power button 5 times in succession to power on or off, and the white LED light will flash 3 times.
3. Fill SMOK RPM 5 Pro POD: Pull out the rubber plug covering the slot, add e-liquid through the opening, and then press the rubber plug back into place carefully and firmly.
4. Prime the Coil (First Use Only): If it's a new coil or the first time filling the pod, let it sit for 5-10 minutes. This allows the coil's cotton to saturate with e-liquid and prevents burning.
5. Change power setting: Press the power button three times in quick succession. The power setting will begin to blink.The power setting will begin to blink. Press or long press the button to increase the power, and when the power setting reaches 80W, it will loop back to 40W. Once the desired power setting is reached, leave the device idle for three seconds to save the setting.
6. Vaping: While the RPM 5 Pro Kit vape device is on, put the device in your mouth and inhale while pressing the Power Button.
7. Replace Coil: Firstly, pull out the pod, and then pull out the RPM 5 Pro coil and install a new one in the pod.
For More Information:
You can find the RPM 5 Pro Kit user manual in the package